Crystal-clear pool water is not possible without care.
It is necessary to regularly maintain the pool to keep the water in good condition.
Technology does not stand still!
We suggest that you consider getting rid of a set of time-consuming and/or expensive procedures for the care of your pool.
Consider the technology of water purification in the pool by points:
1. Cleaning the pool
Dirt and debris floats on the surface, settles on the steps and on the bottom of the pool. Surface and coarse debris can be collected with a net. Small debris can be removed with a hand vacuum cleaner connected to the filtration system or with an automatic vacuum cleaner powered by a mains supply.
But Compass Pools offers you a unique opportunity – a pool without the need for cleaning!
Yes, you do not need to clean the pool at all, because it does all the dirty work for you. That’s exactly what the Compass self-cleaning pool with built-in Vantage pool water treatment technology does. And very easily. A system of strategically placed nozzles takes turns pushing dirt into the pool drain. The filtered water is then returned to the pool through the nozzle system. The process is repeated until the pool is completely clean. This system can be compared to sweeping the floor – the debris is collected and thrown into the bin.
The Compass self-cleaning pool has other advantages. Thanks to regular water circulation:
- heat energy is saved (warm surface water heated by the sun mixes with cold water from the bottom);
- reduces the use of chemicals (water in constant motion prevents bacteria from multiplying and ensures thorough mixing of chemicals for their full effective operation);
- prevents algae growth (there are no dead zones in the pool where algae can actively grow);
- ensures a stable water temperature throughout the pool (the same temperature both on the surface and at the bottom of the shell).
Visually, the self-cleaning pool is indistinguishable from any other Compass bowl. The system of nozzles located in the walls and at the bottom of the pool does not spoil the sophisticated design. Vantage operates according to the time settings, absolutely silently; you can swim in the pool while the system is in operation – it is safe; the nozzles are mounted at the factory during the production of the pool shell.
2. Water without microorganisms, bacteria and algae
In addition to cleaning the pool from debris, take care of its high-quality disinfection. The most common disinfection option is chlorine tablets or granules, which dissolve in water and kill all aquatic life. But in recent years, alternative disinfection methods have become increasingly popular, such as salt electrolysis and hydrolysis. In salt electrolysis, chlorine is released from NaCl (common salt) in water gradually. This technology – swimming pool water treatment – controls the production of chlorine without causing irritation to the skin, eyes and respiratory tract. During hydrolysis, chlorine is completely absent from the water, disinfection occurs through oxidation – hydroxyl ions are produced. The Oxy automatic copper hydrolysis and ionisation system is a complete solution that not only keeps the water in perfect condition, but also ensures that all pool options work according to a set algorithm. That is, with Oxy, you do not need to intervene in the process of disinfection, heating, circulation, etc.
3. The pH level
The correct pH balance is the main factor in clean pool water. A pH level of 7.0 to 7.4 allows any disinfectant to fight microorganisms and bacteria in the water. The pH level can be checked manually or automatically. If the pH level is too low or too high, the pool water can be balanced using pH plus or pH minus. Oxy does all the work for you: the pH level is constantly monitored and automatically adjusted.
Are you interested in pool water treatment technologies?
– Contact us for a complete solution for your pool!
